Setting Up an HP LaserJet on a Wireless Network from an iOS Mobile Device | HP LaserJet | HP


Set up the HP LaserJet printer on a wireless network from an iPhone or iPad. To successfully set up and install your printer, gather the following: an iPad or iPhone that is connected to the
wireless network in which you want to connect your printer, an unboxed HP printer, plugged in, and powered on, an active Internet connection, and a wireless network password or key, if required by your network. If you previously connected a USB cable to your printer, disconnect it. Turn on the printer you want to set up and
wait until it is idle and in a ready state. On a control panel with buttons only, press and hold the Wireless button for twenty seconds. When the Ready and Attention lights blink
simultaneously, release the Wireless button. On a 2-line control panel, press the Setup
button. Open the Network Setup menu, and then select Restore Defaults or Restore Network Settings. On a touchscreen control panel, swipe until the Setup menu displays, and then touch the Setup icon. Touch Network Setup, and then touch Restore Defaults or Restore Network Settings. All printer network settings are restored
to factory defaults. With the settings restored, the printer restarts automatically. On an iPad or iPhone connected to the network in which you want to connect the printer, go to 123.hp.com. Tap Get the App, and then follow the prompts to install HP Smart. Open the HP Smart app. Tap the check box to agree to the terms, and then tap Start. The welcome screen appears the first time the app is opened. If prompted, tap Allow to enable notifications from HP Smart. Tap the plus sign, then Add Printer, and then Set Up and Add a New Printer. To connect the printer to the network, you must make a connection between the printer and your iPad or iPhone. Open the iOS Settings, and then select Wi-Fi. In the list of detected networks, connect
to the network that has HP-Setup and your printer model in its name. Return to HP Smart and the app connects to your printer. For additional assistance, watch the video
on how to connect the printer to Wi-Fi, and then tap the top-left arrow to return
to Set Up and Add a New Printer. Follow the instructions to connect the printer to the network, including adding any network password or passphrase, if necessary. With the printer connected to the wireless
network, reconnect your iPad or iPhone to your wireless network through iOS Settings. Once connected, the app verifies the printer has been successfully set up on the network. If a Cannot Obtain Printer Details screen
displays, simply tap Skip to proceed. If prompted to install cartridges and paper, follow the instructions and videos to install the toner and paper in your printer. Continue following the prompts and adjusting any settings to finish setting up your printer in HP Smart. With the printer setup complete, try to print from your iPad or iPhone by tapping Print a Document. Follow the instructions adjusting any desired settings, and then tap Print. The document prints over the wireless network to your LaserJet printer. The printer is ready for regular printing
and can also be set up on other devices. To confirm the wireless settings and to assist in setting other devices, print a configuration page from the printer
control panel. On a control panel with buttons only, press and hold the Resume button until the Ready light begins blinking. When the Ready light blinks, release the button. On a 2-line control panel, press the Setup
button. Open the Reports menu, and then select Configuration Report. On a touchscreen control panel, swipe until the Setup menu displays, and then touch the Setup icon. Touch Reports, and then touch Configuration Report. The configuration page prints. The page displays the settings for your printer, including the IP address, which can be used to set up your printer on other devices.